# Robot Delta - processing
**URL:** https://discourse.processing.org/t/robot-delta-processing/2987
**Category:** Coding Questions
**Created:** [August 26, 2018, 8:53am UTC](https://discourse.processing.org/t/robot-delta-processing/2987 "2018-08-26T08:53:19Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@henryk167](https://discourse.processing.org/u/henryk167)
#### Post date: [August 26, 2018, 8:53am UTC](https://discourse.processing.org/t/robot-delta-processing/2987/1 "2018-08-26T08:53:19Z")
Hello.
I am looking for a person who would write soft for me to control the deltabot
(manually and auto). Processing should work with arduino. I will be grateful for help.
Henryk
---
### Author:  [@TfGuy44](https://discourse.processing.org/u/TfGuy44)
#### Post date: [August 26, 2018, 10:00am UTC](https://discourse.processing.org/t/robot-delta-processing/2987/2 "2018-08-26T10:00:17Z")
Is this a paying gig?
If so, you can get in touch with me via email.
If not, why do you imagine someone will do all the work for you? You should post the code you have already, and describe to us what the problems you have with it are…
---
### Author:  [@henryk167](https://discourse.processing.org/u/henryk167)
#### Post date: [August 26, 2018, 12:26pm UTC](https://discourse.processing.org/t/robot-delta-processing/2987/3 "2018-08-26T12:26:14Z")
Hi,
Dear friend.
Thank you for digression. There’s a lot of softs on the net and nobody wants to get in there.
If you are such a processing expert, write how much your service costs to meet my requirements. My delta must have manual control and work in the car after asking the appropriate points. In addition, it must be homing and adapted for CV processing.
Best regards
Henryk Bziuk
---
### Author:  [@jeremydouglass](https://discourse.processing.org/u/jeremydouglass)
#### Post date: [September 10, 2018, 7:08pm UTC](https://discourse.processing.org/t/robot-delta-processing/2987/4 "2018-09-10T19:08:27Z")
> [@henryk167](#):
>
> write soft for me to control the deltabot
This sounds like a drawing robot:
> **[Delta robot](https://en.wikipedia.org/wiki/Delta_robot)**
>
> A delta robot is a type of parallel robot that consists of three arms connected to universal joints at the base. The key design feature is the use of parallelograms in the arms, which maintains the orientation of the end effector. In contrast, Stewart platform can change the orientation of its end effector.
> Delta robots have popular usage in picking and packaging in factories because they can be quite fast, some executing up to 300 picks per minute.
> The delta robot (a parallel arm robot) was ...
- [http://deltabot.com](http://deltabot.com)
> [@henryk167](#):
>
> My delta must have manual control and work in the car after asking the appropriate points. In addition, it must be homing and adapted for CV processing.
This sounds like a car navigation system:
> **[Automotive navigation system](https://en.wikipedia.org/wiki/Automotive_navigation_system)**
>
> An automotive navigation system is part of the automobile controls or a third party add-on used to find direction in an automobile. It typically uses a satellite navigation device to get its position data which is then correlated to a position on a road. When directions are needed routing can be calculated. On the fly traffic information (road closures, congestion) can be used to adjust the route.
> Dead reckoning using distance data from sensors attached to the drivetrain, an accelerometer, a gyr...
…so: I’m not sure what Robot Delta is.