# Print-Based Project Using Processing

**URL:** <https://discourse.processing.org/t/print-based-project-using-processing/32299>\
**Category:** Gallery\
**Created:** [September 17, 2021, 11:48pm UTC](https://discourse.processing.org/t/print-based-project-using-processing/32299 "2021-09-17T23:48:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Craig](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@Craig](https://discourse.processing.org/u/Craig)\
**Post date:** [September 17, 2021, 11:48pm UTC](https://discourse.processing.org/t/print-based-project-using-processing/32299/1 "2021-09-17T23:48:24Z")

</div>

Here’s a link to a video about print-based project titled **Explanations and Clarifications**. While most of the work was done in Photoshop, I use Processing as sort of a Swiss Army Knife and use it everywhere. In the video I used it to process the video of my talking head image. In the book I used it extensively to generate the graphics. Usually it’s obvious when programming was used, other times not so much.

[![](https://img.youtube.com/vi/OVto_DbbmO8/hqdefault.jpg "Explanations and Clarifications") ](https://www.youtube.com/watch?v=OVto_DbbmO8)

---

<div class="post-metadata">

**Author:** ![jeremydouglass](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.processing.org/jeremydouglass/32/20_2.png) [@jeremydouglass](https://discourse.processing.org/u/jeremydouglass)\
**Post date:** [September 18, 2021, 9:16pm UTC](https://discourse.processing.org/t/print-based-project-using-processing/32299/2 "2021-09-18T21:16:37Z")

</div>

Thank you for sharing this, @Craig!

Are the inkjet prints being exhibited at a physical location, and/or are the digital images being exhibited virtually?

---

<div class="post-metadata">

**Author:** ![Craig](https://avatars.discourse-cdn.com/v4/letter/c/ed8c4c/32.png) [@Craig](https://discourse.processing.org/u/Craig)\
**Post date:** [September 18, 2021, 11:54pm UTC](https://discourse.processing.org/t/print-based-project-using-processing/32299/3 "2021-09-18T23:54:55Z")

</div>

Jeremy, the prints are not currently being exhibited, but I would like them to be. I print them 17" x 22" and 24" X 36". I output all the components at a relatively high resolution so the big prints will stay sharp. When I make the component pictures in Processing I am amazed at how well it can deal with really large bitmaps. In some cases I make a bunch of versions with random differences and then pick the ones I want to use. Here’s a link to the digital versions on my web site.

[Composites — Dry reading](http://red-green-blue.com/composites)

Craig