# Modifier une cintreuse

**URL:** <https://discourse.processing.org/t/modifier-une-cintreuse/47923>\
**Category:** Electronics (Arduino, etc.)\
**Created:** [February 21, 2026, 11:27am UTC](https://discourse.processing.org/t/modifier-une-cintreuse/47923 "2026-02-21T11:27:18Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![svan](https://avatars.discourse-cdn.com/v4/letter/s/82dd89/32.png) [@svan](https://discourse.processing.org/u/svan)\
**Post date:** [February 21, 2026, 6:59pm UTC](https://discourse.processing.org/t/modifier-une-cintreuse/47923/3 "2026-02-21T18:59:28Z")

</div>

Would something like this be useful in your project? It will allow you to send code from your pc directly to the Arduino:

> [@Arduino Command Line](https://discourse.processing.org/t/arduino-command-line/47395):
>
> The following source code demonstrates arduino-cli which is a command line tool for compiling and uploading an arduino sketch to an arduino usb device. To get started you will need to download arduino-cli to your system if you don’t already have it. On Mac/Linux platforms one option is to install it with Homebrew; on Windows you will need to manually download it. Make certain that you know the path of where it was installed. References to help with installation and getting started are here: …

---

_[View the full topic](https://discourse.processing.org/t/modifier-une-cintreuse/47923)._